中文版
Home Material
简体 | 繁體
Commercial Grade
USA UNS N08825
Other Names
Brand/Supplier
America ->
Classification Nickel and Nickel Alloys
Properties Corrosion Resistance Weldability
Density 8.14 g/cm3
Chemical Element Composition Content (%)
Component Fe C Si Mn S Cr Ni Cu Mo Ti Al
Minimum Value 22 - - - - 19.5 38 1.5 2.5 0.6 -
Maximum Value - 0.05 0.5 1 0.03 23.5 46 3 3.5 1.2 0.2
Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Tube Annealing 772 441 36
Tube Cold Drawing 1000 889 15
Rod Annealing 690 324 45
Plate Annealing 662 338 45
Thin plate Annealing 758 421 39
1 Approximate Comparison Table Corrosion-Resistant Alloy
China Japan South Korea United States Germany United Kingdom
GB ISC JIS KS Commercial Grade UNS DIN EN/DIN W-Nr. BS EN/BS
NS 1402
(NS 142)
(0Cr21Ni42Mo3Cu2Ti) 		H 08825
H 01402 		NCF 825 NCF 825 Incoloy 825 N 08825 NiCr21Mo 2.4858 NA 16
2 Approximate Comparison Table Wrought Corrosion-Resistant Alloy for Welding
China United States International Organization for Standardization
GB ISC ASTM AWS ISO
HNS 1402
NiFe 30Cr21Mo3 		W 58825 N 08825 ERNiCrFe-1 SNi 8065

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!