Nimonic PK33

Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Cr	Cu	Mo	Ti	Zr	B	Co	Al	More
Minimum Value	-	-	-	-	-	16	-	5	1.5	-	-	12	1.7	Ni:余量
Maximum Value	1	0.07	0.5	0.5	0.015	20	0.2	9	3	0.06	0.005	16	2.5	Ni:余量

Mechanical Properties

Temperature °C	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
Forged Bar; 20	Heat Treatment 1	1127	33	41
Forged Bar; 100	Heat Treatment 1	1112	33	39
Forged Bar; 200	Heat Treatment 1	1096	35	39
Forged Bar; 300	Heat Treatment 1	1065	38	40
Forged Bar; 400	Heat Treatment 1	1019	40	42
Forged Bar; 500	Heat Treatment 1	973	37	44
Forged Bar; 600	Heat Treatment 1	957	31	40
Forged Bar; 700	Heat Treatment 1	973	21	29
Forged Bar; 800	Heat Treatment 1	757	18	22
Forged Bar; 900	Heat Treatment 1	494	29	43
Forged Bar; 1000	Heat Treatment 1	170	79	82
Thin Sheet; 20	Heat Treatment 2	1181	29.8	-
Thin Sheet; 100	Heat Treatment 2	1124	29.5	-
Thin Sheet; 200	Heat Treatment 2	1113	31.5	-
Thin Sheet; 300	Heat Treatment 2	1092	30.1	-
Thin Sheet; 400	Heat Treatment 2	1047	32	-
Thin Sheet; 500	Heat Treatment 2	1016	33.3	-
Thin Sheet; 600	Heat Treatment 2	1014	25.5	-
Thin Sheet; 700	Heat Treatment 2	1028	28.3	-
Thin Sheet; 800	Heat Treatment 2	741	15.1	-
Thin Sheet; 900	Heat Treatment 2	432	28.5	-
Thin Sheet; 1000	Heat Treatment 2	134	56.6	-

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!