VDM alloy K-500 Nicorros Al

VDM alloy K-500 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Ni	Cu	Ti	Pb	Al	Zn	Sn
Minimum Value	0.5	-	-	-	-	-	63	27	0.35	-	2.3	-	-
Maximum Value	2	0.18	0.5	1.5	0.02	0.01	-	33	0.85	0.006	3.15	0.02	0.006

VDM alloy K-500 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
20°C		1100	690	24
100°C		1040	670
200°C		1020	640
300°C		980	620
400°C		890	600
500°C		750	570
600°C		620	490
Bar; d=75~100*	Solid Solution + Aging	≥930	≥655	≥20

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!