VDM alloy 800 Nicrofer 3220

Grade	VDM alloy 800
Other Names
Brand/Supplier	Germany -> VDM Metals
Classification	Special Alloy Steel
Properties	Corrosion Resistance Good Machinability
Density	8 g/cm³

VDM alloy 800 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Ni	Cu	Ti	Al
Minimum Value	41	-	0.2	0.5	-	-	19	30	-	0.2	0.2
Maximum Value	47	0.1	0.6	1	0.015	0.01	21.5	32	0.5	0.5	0.4

VDM alloy 800 Mechanical Properties

Product form	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Thin Sheet, Plate, Strip; t≤50	Softening Annealing	≥500	≥210	≥30
Bar; d≤160	Solid Solution Annealing	≥500	≥210	≥30

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!