VDM Alloy 600 Nicrofer 7216

VDM Alloy 600 Chemical Element Composition Content (%)

Component	Fe	C ^*	Si	Mn	P	S	Cr	Cu	Ti	Al	More
Minimum Value	6	0.05	-	-	-	-	14	-	-	-	Ni:余量
Maximum Value	10	0.15	0.5	1	0.02	0.015	17	0.5	0.3	0.3	Ni:余量

VDM Alloy 600 Mechanical Properties

Product form	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Thin Sheet, Strip, Bar, Forging	alloy 600	Annealing	≥550	≥240	≥30
Wire; 0.1≤d<0.3	alloy 600	Annealing	≥600		≥30
Wire; 0.3≤d<0.8	alloy 600	Annealing	≥600		≥15
Wire; d≥0.8	alloy 600	Annealing	≥600		≥10
Thin Plate, Strip Steel	alloy 600H	Solid Solution Annealing	≥500	≥180	≥35
Bar, forging	alloy 600H	Solid Solution Annealing	≥500	≥180	≥30

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!