VDM Alloy 602 CA Nicrofer 6025 HT

VDM Alloy 602 CA Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Cu	Ti	Zr	Al	Y	More
Minimum Value	8	0.15	-	-	-	-	24	-	0.1	0.01	1.8	0.05	Ni:Remainder
Maximum Value	11	0.25	0.5	0.5	0.02	0.01	26	0.1	0.2	0.1	2.4	0.12	Ni:Remainder

Standard and designation DIN EN 2.4633-NiCr25FeAlY; UNS N06025

VDM Alloy 602 CA Mechanical Properties

Temperature °C	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
20	Solution Annealing	≥675	≥270	≥30
100	Solution Annealing	≥650	≥240	≥30
200	Solution Annealing	≥625	≥220	≥30
300	Solution Annealing	≥600	≥200	≥30
400	Solution Annealing	≥580	≥190	≥30
500	Solution Annealing	≥560	≥180	≥30
600	Solution Annealing	≥520	≥175	≥30
700	Solution Annealing	≥420	≥170	≥30

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!