VDM Alloy 617 Nicrofer 5520 Co - H2ABC

中文版

Grade	VDM Alloy 617
Other Names
Brand/Supplier	Germany -> VDM Metals
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance High-Temperature Strength Weldability
Density	8.4 g/cm³

VDM Alloy 617 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P ^*	S	Cr	Ni	Cu	Mo	Ti	B ^*	Co	Al
Minimum Value	-	0.05	-	-	-	-	20	-	-	8	-	-	10	0.8
Maximum Value	3	0.15	1	1	0.012	0.015	24	-	0.5	10	0.6	0.006	15	1.5
Nominal Value	-	-	-	-	-	-	-	45	-	-	-	-	-	-

VDM Alloy 617 Mechanical Properties

Product Form	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Thin Sheet and Strip; Cold Rolled t<6	transverse	Solid Solution Annealing + Quenching	≥750	≥350	≥35
Plate; Hot rolled t≤80	transverse	Solid Solution Annealing + Quenching	≥700	≥300	≥35
bar; d ≤ 300	transverse	Solid Solution Annealing + Quenching	≥680	≥300	≥30
bar; d ≤ 300	longitudinal	Solid Solution Annealing + Quenching	≥680	≥300	≥35

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!