DC01 1.0330 - EN 10139-2016

Grade	DC01
European Standard Steel Grade	1.0330
Corresponding Standard	EN 10139-2016 Cold rolled uncoated low carbon steel narrow strip for cold forming-Technical delivery condition
Classification	Carbon Steel

DC01 Chemical Element Composition Content (%)

Component	C ^*	Mn ^*	P	S
Minimum Value	-	-	-	-
Maximum Value	0.12	0.6	0.045	0.045

DC01 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Narrow strip; t≤10, w≤600	DC01+A	Annealing A	270~390	-	A50 ≥30	HV ≤105
Narrow strip; t≤10, w≤600	DC01+LC	Flattening LC	270~410	①③ ≤280	①② ≥30	① ≤115
Narrow strip; t≤10, w≤600	DC01+C290	Work hardening C290	290~430	200~380	≥20	95~125
Narrow strip; t≤10, w≤600	DC01+C340	Work hardening C340	340~490	≥250		105~155
Narrow strip; t≤10, w≤600	DC01+C390	Work hardening C390	390~540	≥310		117~172
Narrow strip; t≤10, w≤600	DC01+C440	Work hardening C440	440~590	≥360		135~185
Narrow strip; t≤10, w≤600	DC01+C490	Work hardening C490	490~640	≥420		155~200
Narrow strip; t≤10, w≤600	DC01+C590	Work hardening C590	590~740	≥520		185~225
Narrow strip; t≤10, w≤600	DC01+C690	Work hardened C690	≥690	≥630		≥215

1 Approximate Comparison Table High-Quality Carbon Structural Steel

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	SAE	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
08 08F	SPCC	1008 1010	Cr01 CR22	FeP01 St12	C F12 FeP01	DC01 FeP01	1.0330	08kp 08ps	1142	CR4 FeP01

2 Approximate Comparison Table High-Quality Carbon Structural Steel

3 Approximate Comparison Table High-Quality Carbon Structural Steel

DC01 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!