DC04 1.0338 - EN 10139-2016

Grade	DC04
European Standard Steel Grade	1.0338
Corresponding Standard	EN 10139-2016 Cold rolled uncoated low carbon steel narrow strip for cold forming-Technical delivery condition
Classification	Carbon Steel

DC04 Chemical Element Composition Content (%)

Component	C	Mn	P	S
Minimum Value	-	-	-	-
Maximum Value	0.08	0.4	0.03	0.03

DC04 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Narrow strip; t≤10, w≤600	DC04+A	Annealing A	270~350	-	A50 ≥40	HV ≤95
Narrow strip; t≤10, w≤600	DC04+LC	Flattening LC	① 270~350	①③④ ≤210	①② ≥40	① ≤105
Narrow strip; t≤10, w≤600	DC04+C290	Work hardening C290	290~390	220~325	≥26	95~117
Narrow strip; t≤10, w≤600	DC04+C340	Work hardening C340	340~440	≥240		105~130
Narrow strip; t≤10, w≤600	DC04+C390	Work hardening C390	390~490	≥350		117~155
Narrow strip; t≤10, w≤600	DC04+C440	Work hardening C440	440~540	≥440		135~172
Narrow strip; t≤10, w≤600	DC04+C490	Work hardening C490	490~590	≥490		155~185
Narrow strip; t≤10, w≤600	DC04+C590	Work hardening C590	590~690	≥590		185~215

Approximate Comparison Table

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	Sweden	United Kingdom
JIS	ASTM	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
SPCE	A619 DDS	Cr04 CR24	RRSt14 St14	1.0338	ES	DC04 FeP04①	1.0338	05kp 08kp 08YU	1147	1CR 1CS 1HR 1HS CR1

DC04 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!