VDM Alloy HT 60 Cronifer II

Grade	VDM Alloy HT 60
Other Names
Brand/Supplier	Germany -> VDM Metals
Classification	Nickel and Nickel Alloys
Density	8.2 g/cm³

VDM Alloy HT 60 Chemical Element Composition Content (%)

Component	C	Si	Mn	Cr	Ni	Al	Other Total	More
Minimum Value	-	1	-	14	57	-	-	Fe:余量
Maximum Value	0.1	1.75	1	17	-	0.3	0.04	Fe:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

VDM Alloy HT 60 Mechanical Properties

Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
≥600	≥210	≥30

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!