X1CrNiMoCuN33-32-1 1.4591 - SEW 400(1997)

Grade	X1CrNiMoCuN33-32-1
	1.4591
Corresponding Standard	SEW 400(1997) Stainless Steels for Rolled and Forged Products
Classification	Austenitic Stainless Steel
Density	7.9 g/cm³

X1CrNiMoCuN33-32-1 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	-	-	-	31	30	0.3	0.5	0.35
Maximum Value	0.015	0.5	2	0.02	0.01	35	33	1.2	2	0.6

X1CrNiMoCuN33-32-1 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Flat material; t≤50	Quenching	720~920	≥380	≥40	≥120
Bar, Forging; t≤200	Quenching	720~920	≥380	≥40	≥120
Pipe; t≤40	Quenching	720~920	≥380	≥40	≥120
Wire; 0.01 < t ≤ 12.7	Quenching	720~920

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!