NiCu30Al 2.4374 - WL 2.4374-1(1964)

Grade	NiCu30Al
	2.4374
Corresponding Standard	WL 2.4374-1(1964) Nickel-Copper Wrought Alloy; Nicu30al, Creep-Resistant (K-Monel) (For Bars and Forged Pieces)
Classification	Nickel and Nickel Alloys
Properties	Strength Corrosion Resistance
Density	8.46 g/cm³

NiCu30Al Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Ni ^*	Cu	Ti	Al
Minimum Value	-	-	-	-	-	63	27	0.25	2
Maximum Value	2	0.25	1	1.5	0.01	-	34	1	4

NiCu30Al Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Rod	Artificial aging	≥961	≥686	≥17	HB ≥265
Bolts, Screws	Artificial aging	≥961	≥686	≥20	HB ≥265
Bolts, Screws	Cold drawn or solution treated and quenched after cold heading				HB ≤245

NiCu30Al Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!