S355J2W 1.8965 - EN 10025-5-2019

Grade	S355J2W
European Standard Steel Grade	1.8965
Corresponding Standard	EN 10025-5-2019 Hot rolled products of structural steels-Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
Classification	Alloy Steel

S355J2W Chemical Element Composition Content (%)

	Component	C	Si	Mn	P	S	Cr	Ni ^③	Cu	Mo ^③	Zr ^③
长形产品	Minimum Value	-	-	0.5	-	-	0.4	-	0.25	-	-
长形产品	Maximum Value	0.16	0.5	1.5	0.03	0.03	0.8	0.65	0.55	0.3	0.15

	Component	C	Si	Mn	P	S	Cr	Ni ^③	Cu	Mo ^③	Zr ^③
	Minimum Value	-	-	0.5	-	-	0.4	-	0.25	-	-
	Maximum Value	0.16	0.5	1.5	0.035	0.035	0.8	0.65	0.55	0.3	0.15

S355J2W Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t＜3	510~680	≥355	See Remarks
3≤t≤16	470~630	≥355	≥22
16＜t≤40	470~630	≥345	≥22
40＜t≤63	470~630	≥335	≥21
63＜t≤80	470~630	≥325	≥20
80＜t≤100	470~630	≥315	≥20
100＜t≤150	450~600	≥295	≥18

1 Approximate Comparison Table Structural, pressure vessel and engineering steels

2 Approximate Comparison Table Atmospheric corrosion resisting structural steel

China	Japan	United States	International Organization for Standardization	European Standard
GB	JIS	ASTM	ISO	EN
Q355NH GB/T 4171-2008	SMA490AW SMA490BW SMA490CW JIS G3114-2004	Grade K A606-04	S355W ISO 4952-2006 HSA355W2 ISO 5952-2005	S355J0W S355J2W S355K2W EN 10025-5-2004

S355J2W Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!