Grade Q195
China ISC U11952
Other Names
Corresponding Standard GB /T 3274-2017
Hot-Rolled Plates, Sheets and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Sheets
Brand/Supplier
-> BAOSTEEL
Classification Carbon Steel
Properties Weldability
Q195 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Cu As N
Minimum Value - - - - - - - - - -
Maximum Value 0.12 0.3 0.5 0.035 0.04 0.3 0.3 0.3 0.08 0.008
Q195 Mechanical Properties
thickness(diameter)
t(d)
mm
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
≤16 315~430 ≥195 ≥33
>16~40 315~430 ≥185 ≥33
1 Approximate Comparison Table Carbon Structural Steel and Engineering Steel
China United States International Organization for Standardization Germany France Russia United Kingdom
GB ISC ASTM ISO DIN EN/DIN W-Nr. NF EN/NF GOST BS EN/BS
Q195
(A1)
(B1)
U11952 A285M Gr.B HR2 S185
(St33)
1.0035 S185
(A33)
Ст1кп
Ст1сп
Ст1пс
S185
(040A10)
2 Approximate Comparison Table Carbon Structural Steel and Engineering Steel
China Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB JIS ASTM ISO DIN EN/DIN NF EN/NF EN Numerical Grade GOST SS BS EN/BS
Q195 SS330 A283A
A283B
Gr.A
Fe310 S185
St33
A33 S185
Fe310-0①
1.0035 St0
St1ps
St1sp
1300-00 15HR
5HS
S185
3 Approximate Comparison Table Carbon Structural Steel and Engineering Steel
China United States International Organization for Standardization European Standard
GB ISC ASTM/AISI ISO EN Numerical Grade
Q195
(GB/T 700-2006)
U11952 Gr.C [205]
(ASTM A573/A573M:2000)
E185
(ISO 630:1995)
S185
(EN 10025-2:2004)
1.0035
4 Approximate Comparison Table Carbon Structural Steel and Engineering Steel
China Japan United States International Organization for Standardization Germany France Russia United Kingdom
GB JIS ASTM/AISI ISO DIN EN/DIN W-Nr. NF EN/NF GOST BS EN/BS
Q195 SS 330
SPHC
Gr.B E185
(Fe310)
S185 1.0035 S185 Ст1кп
Ст1сп
Ст1пс
S185
5 Approximate Comparison Table Carbon Structural Steel and Engineering Steel
China Japan International Organization for Standardization France Russia
GB JIS ISO NF EN/NF GOST
Q195
(GB/T 700-2006)
SAPH32
(JIS G3113:2006)
Fe310-0
(ISO 630:1995)
(ISO 1052:1982)
A33
(NF A35-501.1~6)
Ст1сп
Ст1кп
(GOST 380-2005)
Q195 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!