HR580T/ 440Y-FB - GMW 3399-2013

Grade	HR580T/ 440Y-FB
Corresponding Standard	GMW 3399-2013 Multi-phase and Ultra-high Strength Sheet Steel
Classification	Alloy Steel

HR580T/ 440Y-FB Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Al	More
Minimum Value	-	-	-	-	-	0.01	(Ni+Cr+Mo)<1.5*
Maximum Value	0.18	0.5	2.5	0.05	0.01	-	(Ni+Cr+Mo)<1.5*

Note: Chemical composition based on mass% product (coil or sheet/blank) analysis.

HR580T/ 440Y-FB Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Hot Rolling	≥580	440~600	* ≥16

HR580T/440Y-FB Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!