QAl10-5-5 T62100 - GB /T 5231-2012

Grade	QAl10-5-5
China ISC	T62100
Corresponding Standard	GB /T 5231-2012
Classification	Copper and Copper Alloys
Properties	Corrosion Resistance High-Temperature Strength Machinability Weldability

QAl10-5-5 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Ni	Pb	Al	Zn	Sn	Mg	Other Total	More
Minimum Value	4	-	0.5	4	-	8	-	-	-	-	Cu:余量
Maximum Value	6	0.25	2.5	6	0.05	11	0.5	0.2	0.1	1.2	Cu:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Approximate Comparison Table Bronze

China	Japan	United States		International Organization for Standardization		Russia	United Kingdom		Australia
GB	JIS	ASTM	UNS	ISO	Numerical Grade	GOST	Commercial Grade	BS EN/BS	Australian Standard AS
QAl10-5-5	C6302 C63020	80Cu-10Al-5Fe-5Ni	C63020	CuAl10Fe5Ni5	C63020	БрАНЖМц10-5-5-1.5	CA104	C63020	630D C63020

QAl10-5-5 Corresponding Standards(Same grade name, different standards)

1	GB /T 5231-2012
	QAl10-5-5 T62100
2	GB /T 5231-2022
	QAl10-5-5 T62100
3	YS /T 649-2018
	QAl10-5-5 T62100

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!