2024T72 A92024 - SAE AMS-QQ-A-250/4A-2007

Grade	2024T72
USA UNS	A92024
Corresponding Standard	SAE AMS-QQ-A-250/4A-2007 Aluminum Alloy 2024, Plate and Sheet
Classification	Aluminum and Aluminum Alloys

2024T72 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	0.3	-	3.8	-	-	1.2	-	-	Al:余量
Maximum Value	0.5	0.5	0.9	0.1	4.9	0.15	0.25	1.8	0.05	0.15	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

2024T72 Mechanical Properties

thickness t inch	Heat Treatment or Condition	Tensile Strength σ_b ksi	Yield Point σ_s ksi	Elongation or Extension Rate δ %
0.01~0.249	T72	≥60	≥46	≥5

1 Approximate Comparison Table Wrought aluminum and aluminum alloy

China	Japan	United States		International Organization for Standardization		Germany		European Standard
GB	JIS	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN
2024	2024 A92024	2024	A92024	AlCu4Mg1	A92024	AlCu4Mg2	3.1355 A92024	EN-AW-AlCu4Mg1

2 Approximate Comparison Table Wrought aluminum and aluminum alloy

China	Japan	United States		International Organization for Standardization		France	European Standard	Russia
GB	JIS	ASTM	UNS	ISO	Numerical Grade	NF EN/NF	EN	GOST
2024(A)	2024(A) A92024	2024(A)	A92024	AlCu4Mg1(A)	A92024	A-UG1 2024(A) A92024	EN-AW-AlCu4Mg1	Д16Ч 1160

3 Approximate Comparison Table Wrought aluminum and aluminum alloy

China		United States		International Organization for Standardization		Germany		European Standard	Russia
GB	ISC	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	GOST
2A12 (LY12)	2024	2024	A92024	AlCu4Mg1	A92024	AlCu4Mg2	3.1355 A92024	EN-AW-AlCu4Mg1	Д16/160

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!