LF6 - GBn 168-1982

Grade	LF6
Corresponding Standard	GBn 168-1982 Aluminum and aluminum alloy sheets of nonheat-treatable strengthening grades
Classification	Aluminum and Aluminum Alloys

LF6 Chemical Element Composition Content (%)

Component	Fe	Si	Be ^①	Mn	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	0.0001	0.5	-	0.02	-	5.8	-	-	Al:余量
Maximum Value	0.4	0.4	0.005	0.8	0.1	0.1	0.2	6.8	0.05	0.1	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

LF6 Mechanical Properties

thickness t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
0.5~4.5	LF6M	M	≥314	≥157	≥15

LF6 Corresponding Standards(Same grade name, different standards)

1	GB /T 3190-2008
	(LF6) 5A06
2	GB /T 3195-2016
	(LF6) 5A06
3	ASTM A350/A350M-2018
	LF6 A350 Grade LF6 Class 1
4	GB /T 3190-2020
	(LF6) 5A06
5	GJB 390A-2008
	(LF6) 5A06
6	GJB 2053A-2008
	(LF6) 5A06
7	GBn 168-1982
	LF6
8	GJB 2379-1995
	LF6 六号工防锈铝 5A06

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!