5A06 LF6 - GJB 390A-2008

Grade	5A06
Old Grade
Corresponding Standard	GJB 390A-2008 Specification for aluminium alloys sheet and plate for space
Classification	Aluminum and Aluminum Alloys

5A06 Chemical Element Composition Content (%)

Component	Fe	Si	Be	Mn	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	0.0001	0.5	-	0.02	-	5.8	-	-	Al余量
Maximum Value	0.4	0.4	0.005	0.8	0.1	0.1	0.2	6.8	0.05	0.1	Al余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

5A06 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
0.5~4.5	O (Sample and Supply Condition)	≤315	≤155	≥15
1.5~4	H34 (Sample and Supply Condition)	≥375	≥265	≥8
>4~13	H34 (Sample and Supply Condition)	≥375	≥285	≥8

5A06 Corresponding Standards(Same grade name, different standards)

1	GB /T 3190-2008
	5A06 (LF6)
2	GB /T 3195-2016
	5A06 (LF6)
3	GB /T 3190-2020
	5A06 (LF6)
4	GB /T 3191-2019
	5A06
5	GJB 390A-2008
	5A06 (LF6)
6	GJB 2053A-2008
	5A06 (LF6)
7	GJB 2379-1995
	5A06 LF6 六号工防锈铝
8	GB /T 3880.1-2012
	5A06

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!