G-NiCr28W 2.4879 - EN 10295-2002

Grade	G-NiCr28W
European Standard Steel Grade	2.4879
Corresponding Standard	EN 10295-2002 Heat resistant steel castings
Classification	Nickel and Nickel Alloys
Density	8.2 g/cm³

G-NiCr28W Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^*	Mo	W	V ^*	Nb ^*	Co ^*
Minimum Value	0.35	1	-	-	-	27	47	-	-	4	-	-	-
Maximum Value	0.55	2	1.5	0.04	0.03	30	50	0.25	0.5	6	0.12	0.6	1

*The maximum content of the element is not specified

G-NiCr28W Mechanical Properties

condition	Test Temperature	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
cast steel	Room Temperature	≥440	≥240	≥3
cast steel	700°C		Creep Strength for 1%-10000h 70
cast steel	800°C	1000h Rupture Strength σr 80	Creep Strength for 1%-10000h 41
cast steel	900°C	1000h Rupture Strength σr 45	Creep Strength for 1%-10000h 22
cast steel	1000°C	1000h Rupture Strength σr 23	Creep Strength for 1%-10000h 10
cast steel	1100°C	1000h Rupture Strength σr 10	Creep Strength for 1%-10000h 4

G-NiCr28W Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!