E195 1.0034 - EN 10296-1-2003

Grade	E195
European Standard Steel Grade	1.0034
Corresponding Standard	EN 10296-1-2003 Welded Circular Steel Tubes for Mechanical and General Engineering Purposes — Technical Delivery Conditions — Part 1: Non-Alloy and Alloy Steel Tubes
Classification	Carbon Steel

E195 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	-	-	-	-	-
Maximum Value	0.15	0.35	0.7	0.045	0.045

E195 Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
管材	+U①②	≥330	ReH: ≥250	long: ≥8③
管材	+A	≥300		long: ≥28③
管材	+N	≥300	ReH: ≥195	long: ≥28③

• long = longitudinal ; tr = transverse.

① For outside diameters ≥ 1 68,3 the values for the normalized condition apply.
② Includes delivery condition +NW.
③ Values are for longitudinal testing and are reduced by 2% for transverse testing.

Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China	Germany	France	European Standard		Russia	United Kingdom
GB	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
Q215	RSt34-2	ES185 TS-30a	E195	1.0034	St2ps St2sp	CEW2 ERW2

E195 Corresponding Standards(Same grade name, different standards)

1	EN 10296-1-2003
	E195 1.0034
2	EN 10305-2-2002
	E195 1.0034
3	EN 10305-3-2023
	E195 1.0034
4	EN 10305-2-2016
	E195 1.0034

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!