102Cr6 1.2067 - EN 10132-4-2002

Grade	102Cr6
European Standard Steel Grade	1.2067
Corresponding Standard	EN 10132-4-2002
Classification	Spring Steel

102Cr6 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo
Minimum Value	0.95	0.15	0.2	-	-	1.35	-	-
Maximum Value	1.1	0.35	0.4	0.025	0.025	1.6	0.4	0.1

102Cr6 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
0.3≤t≤3	Annealing (+A) or Annealing and Flattening (+LC)	≤750	≤590	≥11	HV ≤235
0.3≤t≤3	Tempering (+QT)	1300~2100			405~630

1 Approximate Comparison Table Alloy cold-work tool steel

International Organization for Standardization	Germany		European Standard
ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
102Cr6	102Cr6	1.2067	102Cr6	1.2067

2 Approximate Comparison Table Alloy cold-work tool steel

102Cr6 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!