2022 - AA TEAL -1-2009

Grade	2022
Corresponding Standard	AA TEAL -1-2009 International Alloy Designations and Chemical Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys
Classification	Aluminum and Aluminum Alloys
Density	2.8 g/cm³

2022 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	0.15	-	4.5	-	0.05	0.1	-	-	Al:余量
Maximum Value	0.2	0.15	0.5	0.05	5.5	0.15	0.3	0.45	0.05	0.15	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

2022 Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Solution heat treatment + stress relief + artificial aging (T851)	440	380	14

2022 Corresponding Standards(Same grade name, different standards)

1	ISO 209-2007
	2022
2	AA TEAL -1-2009
	2022

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!