DNiCrFe-3 - JIS Z 3224-1999

Grade	DNiCrFe-3
Corresponding Standard	JIS Z 3224-1999 Nickel and Nickel-alloy Covered Electrodes
Classification	Nickel and Nickel Alloys

DNiCrFe-3 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Ni ^①	Cu	Ti	Co ^*	Ta ^*	Other Total	More
Minimum Value	-	-	-	5	-	-	13	59	-	-	-	-	-	Nb+Ta:1~2.5
Maximum Value	10	0.1	1	9.5	0.02	0.015	17	-	0.5	1	0.12	0.3	0.5	Nb+Ta:1~2.5

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

DNiCrFe-3 Mechanical Properties

Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %
≥560	≥30

Approximate Comparison Table Covered Electrode

Japan	United States	Germany	European Standard
JIS	ASTM	W-Nr.	EN	Numerical Grade
DNiCrFe-3	ENiCrFe-3	2.4807	NiCr15Fe6Mn	Ni6182

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!