中文版
Home Material JIS G 4305-2021
简体 | 繁體
Grade SUS 309S
Other Names
Corresponding Standard JIS G 4305-2021
Cold-rolled stainless steel plate, sheet and strip
Classification Austenitic Stainless Steel
Properties Corrosion Resistance
SUS 309S Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni
Minimum Value - - - - - 22 12
Maximum Value 0.08 1 2 0.045 0.03 24 15
①Where necessary, –CP may be attached after the above symbol of grade to indicate that the product is a plate. Example SUS 310L-CP
②Where necessary, –CS may be attached after the above symbol of grade to indicate that the product is a strip. Example SUS304-CS
SUS 309S Mechanical Properties
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
Solid Solution ≥520 ≥205 ≥40 ≤187
1 Approximate Comparison Table Austenitic Stainless Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST
06Cr23Ni13
(0Cr23Ni13) 		S30908 309S SUS 309S STS 309S 309S S30908 X12CrNi 23-13
X6CrNi23-13 		X7CrNi 23-14 1.4833 Z15CN 24-13 X12CrNi 23-13
X6CrNi23-13 		1.4833
1.4950 		10Х23Н13
2 Approximate Comparison Table Austenitic Heat-Resistant Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST
06Cr23Ni13
(0Cr23Ni13) 		S30908 309S SUS 309S STS 309S 309S S30908 X12CrNi 23-13 X7CrNi 23-14
X12CrNi 23-13 		1.4833
1.4833 		Z15CN 24-13 X12CrNi 23-13 1.4833 10Х23Н13
3 Approximate Comparison Table Austenitic Heat-Resistant Steel
Japan United States France European Standard Russia United Kingdom
JIS ASTM UNS NF EN/NF EN Numerical Grade GOST BS EN/BS
SUS309S 309S S30908 Z15CN23-13 X12CrNi23-13 1.4833 20KH23N13 309S16
309S24
SUS309S Corresponding Standards(Same grade name, different standards)
1 JIS G 4303-2005
SUS 309S
2 JIS G 4304-2005
SUS 309S SUS 309S-HP SUS 309S-HS
3 JIS G 4308-2013
SUS 309S
4 JIS G 4309-2013
SUS 309S SUS 309S-W1
5 JIS G 4318-2016
SUS 309S
6 JIS G 4305-2021
SUS 309S SUS 309S-CP SUS 309S-CS

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!