SUS 316J1L SUS 316J1L-CP SUS 316J1L-CS - JIS G 4305-2021

Grade	SUS 316J1L
Other Names
Corresponding Standard	JIS G 4305-2021 Cold-Rolled Stainless Steel Plate, Sheet and Strip
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

SUS 316J1L Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo
Minimum Value	-	-	-	-	-	17	12	1	1.2
Maximum Value	0.03	1	2	0.045	0.03	19	16	2.5	2.75

①Where necessary, –CP may be attached after the above symbol of grade to indicate that the product is a plate. Example SUS 310L-CP
②Where necessary, –CS may be attached after the above symbol of grade to indicate that the product is a strip. Example SUS304-CS

SUS 316J1L Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Solid Solution	≥480	≥175	≥40	≤187

1 Approximate Comparison Table Austenitic Stainless Steel

China		Taiwan, China	Japan	South Korea
GB	ISC	CNS	JIS	KS
022Cr18Ni14Mo2Cu2 (00Cr18Ni14Mo2Cu2)	S31683	316J1L	SUS 316J1L	STS 316J1L

2 Approximate Comparison Table Austenitic Stainless Steel

China	Japan	International Organization for Standardization		European Standard
ISC	JIS	ISO	Numerical Grade	Numerical Grade
S31683	SUS316J1L	X2CrNiMoCu18-14-2-2	4647-316-75-X	(1.4647)

SUS316J1L Corresponding Standards(Same grade name, different standards)

1	JIS G 4303-2005
	SUS 316J1L
2	JIS G 4304-2005
	SUS 316J1L SUS 316J1L-HP SUS 316J1L-HS
3	JIS G 4305-2021
	SUS 316J1L SUS 316J1L-CP SUS 316J1L-CS

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!