SUS 890L SUS 890L-CP SUS 890L-CS - JIS G 4305-2021

Grade	SUS 890L
Other Names
Corresponding Standard	JIS G 4305-2021 Cold-Rolled Stainless Steel Plate, Sheet and Strip
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

SUS 890L Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo
Minimum Value	-	-	-	-	-	19	23	1	4
Maximum Value	0.02	1	2	0.045	0.03	23	28	2	5

①Where necessary, –CP may be attached after the above symbol of grade to indicate that the product is a plate. Example SUS 310L-CP
②Where necessary, –CS may be attached after the above symbol of grade to indicate that the product is a strip. Example SUS304-CS

SUS 890L Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Solid Solution	≥490	≥215	≥35	≤187

Approximate Comparison Table Austenitic Stainless Steel

China		Japan	United States		International Organization for Standardization		France	European Standard		Sweden	United Kingdom
GB	ISC	JIS	ASTM/AISI	UNS	ISO	Numerical Grade	NF EN/NF	EN	Numerical Grade	SS	BS EN/BS
015Cr21Ni26Mo5Cu2	S31782	SUS 890L	904L	N08904	X1NiCrMoCu25-20-5	4539-089-04-I	Z2NCDU25-20	X1NiCrMoCu25-20-5	1.4539	2562	904S13

SUS890L Corresponding Standards(Same grade name, different standards)

1	JIS G 4303-2005
	SUS 890L
2	JIS G 4304-2005
	SUS 890L SUS 890L-HP SUS 890L-HS
3	JIS G 4305-2021
	SUS 890L SUS 890L-CP SUS 890L-CS

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!