SUS 410L SUS 410L-CP SUS 410L-CS - JIS G 4305-2021

Grade	SUS 410L
Other Names
Corresponding Standard	JIS G 4305-2021 Cold-Rolled Stainless Steel Plate, Sheet and Strip
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance
Density	7.75 g/cm³

SUS 410L Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni
Minimum Value	-	-	-	-	-	11	-
Maximum Value	0.03	1	1	0.04	0.03	13.5	0.6

①Where necessary, –CP may be attached after the above symbol of grade to indicate that the product is a plate. Example SUS 310L-CP
②Where necessary, –CS may be attached after the above symbol of grade to indicate that the product is a strip. Example SUS304-CS

SUS 410L Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Annealing	≥360	≥195	≥22	≤183

1 Approximate Comparison Table Ferritic Stainless Steel

China		Taiwan, China	Japan	South Korea	France
GB	ISC	CNS	JIS	KS	NF EN/NF
022Cr12 (00Cr12)	S11203	401L	SUS 410L	STS 410L	Z3CT 12

2 Approximate Comparison Table Ferritic Heat-Resistant Steel

China		Japan	South Korea
GB	ISC	JIS	KS
022Cr12 (00Cr12)	S11203	SUS 410L	STR 410L

3 Approximate Comparison Table Ferritic Stainless Steel

China		Japan	International Organization for Standardization		European Standard
GB	ISC	JIS	ISO	Numerical Grade	Numerical Grade
022Cr12 (00Cr12) GB/T 20878-2024	S11203	SUS410L	X2Cr12 ISO 15510	4030-410-90-X	(1.4030)

SUS410L Corresponding Standards(Same grade name, different standards)

1	JIS G 4303-2005
	SUS 410L
2	JIS G 4304-2005
	SUS 410L SUS 410L-HP SUS 410L-HS
3	JIS G 4308-2013
	SUS 410L
4	Q/BQB 4302-2009
	SUS 410L 410L
5	JIS G 4317-2018
	SUS 410L
6	JIS G 4305-2021
	SUS 410L SUS 410L-CP SUS 410L-CS

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!