SUS 430J1L SUS 430J1L-CP SUS 430J1L-CS - JIS G 4305-2021

Grade	SUS 430J1L
Other Names
Corresponding Standard	JIS G 4305-2021 Cold-rolled stainless steel plate, sheet and strip
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance

SUS 430J1L Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	N	More
Minimum Value	-	-	-	-	-	16	-	0.3	-	Ti，Nb,Zr or Ti+Nb+Zr：8(C+N) ~ 0.80
Maximum Value	0.025	1	1	0.04	0.03	20	0.6	0.8	0.25	Ti，Nb,Zr or Ti+Nb+Zr：8(C+N) ~ 0.80

①Where necessary, –CP may be attached after the above symbol of grade to indicate that the product is a plate. Example SUS 310L-CP
②Where necessary, –CS may be attached after the above symbol of grade to indicate that the product is a strip. Example SUS304-CS

SUS 430J1L Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Annealing	≥390	≥205	≥22	≤192

Approximate Comparison Table Ferritic Stainless Steel

Japan	International Organization for Standardization		European Standard
JIS	ISO	Numerical Grade	Numerical Grade
SUS430J1L	X2CrCuTi18	4664-430-75-J	(1.4664)

SUS430J1L Corresponding Standards(Same grade name, different standards)

1	JIS G 4304-2005
	SUS 430J1L SUS 430J1L-HP SUS 430J1L-HS
2	JIS G 4305-2021
	SUS 430J1L SUS 430J1L-CP SUS 430J1L-CS

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!