HBi59-1 T49360 - GB /T 5231-2012

Grade	HBi59-1
China ISC	T49360
Corresponding Standard	GB /T 5231-2012 Designation and chemical composition of wrought copper and copper alloys
Classification	Copper and Copper Alloys
Properties	Corrosion Resistance Good Machinability Good Weldability

HBi59-1 Chemical Element Composition Content (%)

Component	Fe ^①	Cu	Pb	Sn	Bi	Cd	Other Total ^②	More
Minimum Value	-	58	-	-	0.8	-	-	Zn:Remainder
Maximum Value	0.2	60	0.1	0.2	2	0.01	0.5	Zn:Remainder

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

① The mass fraction of iron in non-magnetic brass shall not exceed 0.03%.
②This value represents the sum of the actual measured values of the impurity elements listed in the table.

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!