LY16-1 - GJB 2055-1994

Grade	LY16-1
Corresponding Standard	GJB 2055-1994 Specification for aluminium and aluminium alloys wires for rivets
Classification	Aluminum and Aluminum Alloys

LY16-1 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	V	Zr	Mg	Other Individual	Other Total	More
Minimum Value	-	-	0.2	5.8	0.08	0.05	0.1	-	-	-	Al: Remainder
Maximum Value	0.3	0.25	0.4	6.8	0.2	0.15	0.25	0.05	0.05	0.15	Al: Remainder

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

LY16-1 Mechanical Properties

thickness t mm	Test Temperature	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa
All Sizes	Room Temperature		CS	Shear Strength (MPa) ≥275
All Sizes	Room temperature	Grade A	CS	Shear Strength (MPa) ≥186
All Sizes	Room temperature	Grade B	CS	Shear Strength (MPa) ≥177

LY16-1 Corresponding Standards(Same grade name, different standards)

1	GB /T 3190-2008
	LY16-1 2B16
2	GB /T 3195-2016
	(LY16-1) 2B16
3	GB /T 3190-2020
	LY16-1 2B16
4	GJB 2055-1994
	LY16-1

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!