ВТ1-00 - GOST 19807-1991

Grade	ВТ1-00
Corresponding Standard	GOST 19807-1991 Titanium and Wrought Titanium Alloys
Classification	Titanium and Titanium Alloys

ВТ1-00 Chemical Element Composition Content (%)

Component	Fe	C	Si	N	Al	H	O	Other Total	More
Minimum Value	-	-	-	-	-	-	-	-	Cr+Mn≤0.15
Maximum Value	0.15	0.05	0.08	0.04	0.3	0.008	0.1	0.1	Cr+Mn≤0.15

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

◎ The mass fraction of copper and nickel in titanium and in all alloys shall be not more than 0.10 % (in total), including not more than 0.08 % nickel.

Approximate Comparison Table Processing Titanium and Titanium Alloys

Japan	United States	Germany		France	Russia	United Kingdom
JIS	ASTM/AISI	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	BS EN/BS
Cl1	ERTi-1	Ti1	3.7024 3.7025	Ti-P.01	VT1-00 ВТ1-00	IMI115

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!