SUS410-HR - JIS G 4312-2019

Grade	SUS410-HR
Corresponding Standard	JIS G 4312-2019 Heat-Resistant Steel Plate, Sheet and Strip
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance
Density	7.75 g/cm³

SUS410-HR Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni
Minimum Value	-	-	-	-	-	11.5	-
Maximum Value	0.15	1	1	0.04	0.03	13.5	0.6

SUS410-HR Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Plates, strips	Annealing	≥440	≥205	≥20	≤201

SUS410-HR Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!