SUS410-WSB SUS410 - JIS G 4315-2013

Grade	SUS410-WSB
Other Names
Corresponding Standard	JIS G 4315-2013 Stainless Steel Wires for Cold Heading and Cold Forging
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance

SUS410-WSB Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni
Minimum Value	-	-	-	-	-	11.5	-
Maximum Value	0.15	1	1	0.04	0.03	13.5	0.6

SUS410-WSB Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
Wire rod; 0.8≤d<2	Solid Solution After Drawing	540~740	-	≥65
Wire; 2≤d≤17	Solid Solution After Drawing	460~640	≥10	≥65

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!