ZAlSi12Cu2Mg1 ZL108 - GB /T 1173-2013

Grade	ZAlSi12Cu2Mg1
China ISC	ZL108
Corresponding Standard	GB /T 1173-2013 Casting Aluminum Alloy
Classification	Aluminum and Aluminum Alloys
Density	2.68 g/cm³

ZAlSi12Cu2Mg1 Chemical Element Composition Content (%)

	Component	Fe	Si	Mn	Ni	Cu	Ti	Pb	Zn	Sn	Mg	Other Total	More
J-金属型铸造	Minimum Value	-	11	0.3	-	1	-	-	-	-	0.4	-	Al:余量
J-金属型铸造	Maximum Value	0.7	13	0.9	0.3	2	0.2	0.05	0.2	0.05	1	1.2	Al:余量

	Component	Si	Mn	Ni	Cu	Ti	Pb	Zn	Sn	Mg	More
S-砂型铸造	Minimum Value	11	0.3	0.3	1	-	-	-	-	0.4	Al:余量
S-砂型铸造	Maximum Value	13	0.9	-	2	0.2	0.05	0.2	0.05	1	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

ZAlSi12Cu2Mg1 Mechanical Properties

casting process	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %	Hardness HBW
J	T1 - Artificial Aging	≥195	-	≥85
J	T6 - Solution Treatment + Full Artificial Aging	≥255	-	≥90

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!