46Cr2 1.7006 - EN 10083-3-2006

Grade	46Cr2
European Standard Steel Grade	1.7006
Corresponding Standard	EN 10083-3-2006
Classification	Alloy Steel

46Cr2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr
Minimum Value	0.42	-	0.5	-	-	0.4
Maximum Value	0.5	0.4	0.8	0.025	0.035	0.6

• Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat and for boron to have its effect on the hardenability. All reasonable precautions shall be taken to prevent the addition of such elements from scrap or other material used in the manufacture which affect the hardenability, mechanical properties and applicability.

1 Approximate Comparison Table Structural Alloy Steel

Germany		European Standard
DIN EN/DIN	W-Nr.	EN	Numerical Grade
46Cr2	1.7006	46Cr2	1.7006

2 Approximate Comparison Table Steel for Cold Heading and Cold Extrusion

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
46Cr2	46Cr2	1.7006

3 Approximate Comparison Table Structural Alloy Steel

China	International Organization for Standardization	Germany	European Standard
GB	ISO	DIN EN/DIN	EN
45Cr	46Cr2	46Cr2	46Cr2

46Cr2 Corresponding Standards(Same grade name, different standards)

1	DIN 17200-1987
	46Cr2 1.7006
2	EN 10083-3-2006
	46Cr2 1.7006
3	EN 10263-4-2001
	46Cr2 1.7006
4	EN 10250-3-1999
	46Cr2 1.7006
5	DIN 17230-1980
	(46Cr2) 44Cr2 1.3561 (1.7005) (1.7006) (45Cr2)
6	DIN EN 10263-4-2018
	46Cr2 1.7006
7	EN 10263-4-2017
	46Cr2 1.7006
8	ISO 4954-2018
	46Cr2
9	NF EN 10083-3-2006
	46Cr2 1.7006
10	ISO 4954-1-2024
	46Cr2
11	DIN 1654-4-1989
	46Cr2 1.7006

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!