N06975 - ASTM B582-2007(R2018)

Grade	N06975
Corresponding Standard	ASTM B582-2007(R2018) Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
Classification	Nickel and Nickel Alloys
Density	8.17 g/cm³

N06975 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	Ti	More
Minimum Value	-	-	-	-	-	23	47	0.7	5	0.7	Fe:余量
Maximum Value	0.03	1	1	0.03	0.03	26	52	1.2	7	1.5	Fe:余量

N06975 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Plate; 4.76≤t≤63.5	Annealing	≥586	≥221	≥40	HRB ≤100
thin plate and strip; t > 0.51	Annealing	≥586	≥221	≥40	HRB ≤100

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!