N06007 - ASTM B582-2007(R2018)

Grade	N06007
Corresponding Standard	ASTM B582-2007(R2018) Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
Classification	Nickel and Nickel Alloys
Density	8.31 g/cm³

N06007 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Cu	Mo	W	Co	More
Minimum Value	18	-	-	1	-	-	21	1.5	5.5	-	-	Ni:余量；Cb+Ta:1.75~2.5
Maximum Value	21	0.05	1	2	0.04	0.03	23.5	2.5	7.5	1	2.5	Ni:余量；Cb+Ta:1.75~2.5

N06007 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Plate; 4.76≤t≤19.05	Annealing	≥621	≥241	≥35	HRB ≤100
Plate; 19.05<t≤63.5	Annealing	≥586	≥207	≥30	HRB ≤100
thin plate and strip; t > 0.51	Annealing	≥621	≥241	≥40	HRB ≤100

Approximate Comparison Table Corrosion-Resistant Alloy

N06007 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!