N06030 - ASTM B582-2007(R2018)

Grade	N06030
Corresponding Standard	ASTM B582-2007(R2018) Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
Classification	Nickel and Nickel Alloys
Density	8.22 g/cm³

N06030 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Cu	Mo	W	Co	More
Minimum Value	13	-	-	-	-	-	28	1	4	1.5	-	Ni:余量；Cb+Ta:0.3~1.5
Maximum Value	17	0.03	0.8	1.5	0.04	0.02	31.5	2.4	6	4	5	Ni:余量；Cb+Ta:0.3~1.5

N06030 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Plate	Annealing	≥586	≥241	≥30
thin plate and strip; t > 0.51	Annealing	≥586	≥241	≥30

Approximate Comparison Table Corrosion-Resistant Alloy

N06030 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!