ACP 5080 - H2ABC

Grade	ACP 5080
Classification	Aluminum and Aluminum Alloys
Density	2.657 g/cm³

ACP 5080 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	0.4	0.05	-	-	-	4	-	-	Al:Remainder
Maximum Value	0.4	0.4	1	0.25	0.1	0.15	0.25	4.9	0.05	0.15	Al:Remainder

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

ACP 5080 Mechanical Properties

Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
240~290	110~130	15	70

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!