SCMn 2 - JIS G 5111-1991

Grade	SCMn 2
Corresponding Standard	JIS G 5111-1991 High tensile strength carbon steel castings and low alloy steel castings structural purposes
Classification	Cast Steel

SCMn 2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	0.25	0.3	1	-	-
Maximum Value	0.35	0.6	1.6	0.04	0.04

SCMn 2 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
Cast steel	SCMn 2A	Normalization Followed by Tempering	≥590	≥345	≥16	≥35	≥143
Cast steel	SCMn 2B	Quenching Followed by Tempering	≥640	≥440	≥16	≥35	≥183

1 Approximate Comparison Table Structural Alloy Steel

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
30Mn2	SCMn2	1527 Gr.1330	28Mn6	28Mn6	35Mn5	28Mn6	1.1170	30G 30G2	120M36 150H19 150M19 150M28

2 Approximate Comparison Table Cast Steel

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!