SCSiMn 2 - JIS G 5111-1991

Grade	SCSiMn 2
Corresponding Standard	JIS G 5111-1991 High tensile strength carbon steel castings and low alloy steel castings structural purposes
Classification	Cast Steel

SCSiMn 2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	0.25	0.5	0.9	-	-
Maximum Value	0.35	0.8	1.2	0.04	0.04

SCSiMn 2 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
Cast steel	SCSiMn 2A	Normalization Followed by Tempering	≥590	≥295	≥13	≥35	≥163
Cast steel	SCSiMn 2B	Quenching Followed by Tempering	≥640	≥440	≥17	≥35	≥183

Approximate Comparison Table cast steel

SCSiMn2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!