1060 A1060BE - JIS H 4040-2015

Grade	1060
Other Names
Corresponding Standard	JIS H 4040-2015 Aluminium and aluminium alloy bars and wires
Classification	Aluminum and Aluminum Alloys
Properties	Corrosion Resistance Weldability

1060 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	V	Al	Zn	Mg	Other Individual
Minimum Value	-	-	-	-	-	-	99.6	-	-	-
Maximum Value	0.35	0.25	0.03	0.05	0.03	0.05	-	0.05	0.03	0.03

1060 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Extruded bar (BE); 3≤d≤30	1060 H112	Strain-Hardening (H112)	≥60	≥30	A50mm ≥25

① A50mm、A（5.65√S0）- gauge length，S0-Specimen area，s=S0，unit mm sq
② d-diameter、thickness or width across flats, unit mm；s - cross section area, unit mm sq

Approximate Comparison Table Wrought Aluminum and Aluminum Alloy

China	Japan	United States		International Organization for Standardization		European Standard
GB	JIS	ASTM	UNS	ISO	Numerical Grade	EN
1060	1060 A91060	1060	A91060	Al99.6	A91060	EN-AW-Al99.6

1060 Corresponding Standards(Same grade name, different standards)

1	ASTM A29/A29M-2012
	1060 G10600
2	GB /T 3190-2008
	1060 (L2)
3	ASTM A510/A510M-2013
	1060 G10600 1060
4	SAE J403-2014
	1060 G10600
5	ASTM A29/A29M-2020
	1060 G10600
6	GB /T 3190-2020
	1060 (L2)
7	JIS H 4040-2015
	1060 A1060BE
8	GB /T 3191-2019
	1060 (L2)
9	GB /T 3880.1-2012
	1060 (L2)
10	JIS H 4000-2022
	1060 A1060P

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!