1050 A1050 BE A1050 BD - JIS H 4040-2015

Grade	1050
Other Names
Corresponding Standard	JIS H 4040-2015 Aluminium and aluminium alloy bars and wires
Classification	Aluminum and Aluminum Alloys
Properties	Corrosion Resistance Weldability

1050 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	V	Al	Zn	Mg	Other Individual
Minimum Value	-	-	-	-	-	-	99.5	-	-	-
Maximum Value	0.4	0.25	0.05	0.05	0.03	0.05	-	0.05	0.05	0.03

1050 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
extrude bars (BE);3≤d≤30	1050 H112	Strain-Hardening (H112)	≥65	≥20	-
Cold drawn bars (BD), wire rods (W); d ≤ 3	1050 O	Annealing (O)	60~100	-	-
Cold Drawn Bar (BD), Wire (W); 3<d≤100	1050 O	Annealing (O)	60~100	≥20	A50mm ≥25
Cold drawn bars (BD), wire (W); d≤10	1050 H14	Strain-hardening-1/2 hard (H14)	≥95	-	-
Cold drawn bars (BD), wire (W); d≤10	1050 H18	Strain-Hardening - Hard (H18)	≥125	-	-

① A50mm、A（5.65√S0）- gauge length，S0-Specimen area，s=S0，unit mm sq
② d-diameter、thickness or width across flats, unit mm；s - cross section area, unit mm sq

1 Approximate Comparison Table Wrought aluminum and aluminum alloy

China	Japan	United States		International Organization for Standardization		Germany		European Standard	United Kingdom
GB	JIS	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	Commercial Grade	BS EN/BS
1050	1050 A91050	1050	A91050	Al99.5	A91050	Al99.5	3.0255 A91050	EN-AW-Al99.5	1B	1050 A91050

2 Approximate Comparison Table Aluminium and aluminium alloy

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	Sweden	United Kingdom
JIS	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
1050	A91060	Al99.5	Al99.5	3.0255	1050A	ENAW-Al99.5	ENAW-1050A	AD0	Al99.5	1050A

1050 Corresponding Standards(Same grade name, different standards)

1	AA
	1050
2	ASTM A29/A29M-2012
	1050 G10500
3	GB /T 3190-2008
	1050
4	ASTM A29/A29M-2005
	1050 G10500
5	ASTM A510/A510M-2013
	1050 G10500 1050
6	SAE J403-2014
	1050 G10500
7	ASTM A29/A29M-2020
	1050 G10500
8	ASTM A866-2014
	1050
9	GB /T 3190-2020
	1050
10	JIS H 4040-2015
	1050 A1050 BE A1050 BD A1050 W
11	JIS H 4160-1994(R2005)
	1050
12	GB /T 3880.1-2012
	1050
13	JIS H 4000-2022
	1050 A1050P

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!