6101 A6106 BE - JIS H 4040-2015

Grade	6101
Other Names
Corresponding Standard	JIS H 4040-2015 Aluminium and Aluminium Alloy Bars and Wires
Classification	Aluminum and Aluminum Alloys

6101 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	B	Zn	Mg	More
Minimum Value	-	0.3	-	-	-	-	-	0.35	Al:余量
Maximum Value	0.5	0.7	0.03	0.03	0.1	0.06	0.1	0.8	Al:余量

6101 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Extruded bar (BE); 3≤d≤7	A6101 T6	Solid Solution Heat Treatment + Artificial Aging (T6)	≥195	≥165	A50mm ≥10
Extruded Bar (BE); 7<d≤17		Solid Solution Heat Treatment + Artificial Aging (T6)	≥195	≥165	≥12
Extruded Bar (BE); 17<d≤30		Solid Solution Heat Treatment + Artificial Aging (T6)	≥175	≥145	≥14
Extruded bar (BE); 3≤d≤17	A6101 T7	Solution heat treatment + stabilization (T7)	≥135	≥110	≥10

① A50mm、A（5.65√S0）- gauge length，S0-Specimen area，s=S0，unit mm sq
② d-diameter、thickness or width across flats, unit mm；s - cross section area, unit mm sq

6101 Corresponding Standards(Same grade name, different standards)

1	GB /T 3190-2008
	6101
2	GB /T 3190-2020
	6101
3	JIS H 4040-2015
	6101 A6106 BE

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!