CuZn36Pb1.5 2.0331 Ms63Pb - DIN 17660-1983

Grade	CuZn36Pb1.5
Germany W-Nr.	2.0331
Old Grade
Corresponding Standard	DIN 17660-1983
Classification	Copper and Copper Alloys
Density	8.5 g/cm³

CuZn36Pb1.5 Chemical Element Composition Content (%)

Component	Fe	Ni	Cu	Pb	Al	Sn	Other Total	More
Minimum Value	-	-	62	0.7	-	-	-	Zn:remainder
Maximum Value	0.2	0.3	64	2.5	0.05	0.1	0.1	Zn:remainder

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Corresponding grades: CuZn35Pb1, CuZn34Pb2 / ISO 426-2-1983
For old designations, see the appendix of this standard.

1 Approximate Comparison Table brass

China		United States		International Organization for Standardization		Germany		Russia	United Kingdom
GB	ISC	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	GOST	Commercial Grade	BS EN/BS
HPb62-2	C35300	62Cu-36Zn-2Pb	C35300	CuZn36Pb2	C35300	CuZn36Pb2	C35300 2.0331	ЛС62-2	CZ119	C35300

2 Approximate Comparison Table Cupper and cupper alloy

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	United Kingdom
JIS	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
C3501	C34000	CuZn35Pb1	CuZn36Pb1.5	2.0331	CuZn35Pb2	CuZn35Pb1	CW600N	LS63-3	CZ118

CuZn36Pb1.5 Corresponding Standards(Same grade name, different standards)

1	DIN 17672-1-1983
	CuZn36Pb1.5 2.0331 (Ms63Pb)
2	DIN 17671-1-1983
	CuZn36Pb1.5 2.0331 (Ms63Pb)
3	DIN 17660-1983
	CuZn36Pb1.5 2.0331 (Ms63Pb)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!