CuZn36 2.0335 Ms63 - DIN 17660-1983

Grade	CuZn36
Germany W-Nr.	2.0335
Old Grade
Corresponding Standard	DIN 17660-1983
Classification	Copper and Copper Alloys
Density	8.4 g/cm³

CuZn36 Chemical Element Composition Content (%)

Component	Fe	Ni	Cu	Pb	Al	Sn	Other Total	More
Minimum Value	-	-	63.5	-	-	-	-	Zn:余量
Maximum Value	0.05	0.2	65	0.05	0.02	0.05	0.1	Zn:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

1 Approximate Comparison Table brass

China	Japan	United States		International Organization for Standardization		Germany		European Standard		Russia
GB	JIS	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	Numerical Grade	GOST
H65	C2700	65Cu-35Zn	C27000	CuZn36	C27000	CuZn36	C27000 2.0335	CuZn36	CW507L	Л65

2 Approximate Comparison Table Cupper and cupper alloy

Japan	United States	International Organization for Standardization	Germany		European Standard		Russia	Sweden	United Kingdom
JIS	UNS	ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade	GOST	SS	BS EN/BS
C2720	C27400	CuZn37	CuZn36 CuZn37	2.0335	CuZn36	CW507L	l63	CuZn37	CZ108

3 Approximate Comparison Table brass

China	Japan	United States	International Organization for Standardization	Germany	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	BS EN/BS
H65	C2700	C27000	CuZn35	CuZn36	CZ107

CuZn36 Corresponding Standards(Same grade name, different standards)

1	EN 12163-1998
	CuZn36 CW507L
2	EN 12166-1998
	CuZn36 CW507L
3	EN 1654-1998
	CuZn36 CW507L
4	EN 12166-2016
	CuZn36 CW507L
5	DIN EN 12163-1998
	CuZn36 CW507L
6	DIN EN 12163-2016
	CuZn36 CW507L
7	DIN 17671-1-1983
	CuZn36 2.0335 (Ms63)
8	DIN EN 12166-2016
	CuZn36 CW507L
9	DIN EN 12166-1998
	CuZn36 CW507L
10	DIN 17660-1983
	CuZn36 2.0335 (Ms63)
11	EN 12163-2016
	CuZn36 CW507L
12	DIN 2076-1984
	CuZn36
13	EN 12167-2024
	CuZn36 CW507L
14	DIN EN 12449-2019
	CuZn36 CW507L
15	EN 12449-2023
	CuZn36 CW507L

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!