Al Mg5 - JIS H 5202-2010

Grade	Al Mg5
Corresponding Standard	JIS H 5202-2010 Aluminium alloy castings
Classification	Aluminum and Aluminum Alloys

Al Mg5 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	Zn	Mg	Other Individual ^②	Other Total ^②	More
Minimum Value	-	-	-	-	-	-	4.5	-	-	Al:余量
Maximum Value	0.55	0.55	0.45	0.1	0.2	0.1	6.5	0.05	0.15	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Al Mg5 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Hardness HBW
permanent mould casting test pieces	as fabricated (F)	≥180	≥100	≥4	≥60
sand casting test pieces	as fabricated (F)	≥160	≥90	≥3	≥55
(Lost-Wax Casting test pieces	as fabricated (F)	≥170	≥95	≥3	≥55

AlMg5 Corresponding Standards(Same grade name, different standards)

1	DIN
	AlMg5 3.3555 5056 A
2	DIN EN 1301-2-2008
	AlMg5 EN AW-5019 (3.3555) EN AW-AlMg5
3	DIN 1725-1-1983
	AlMg5 3.3555 5056A
4	ISO 209-2007
	(AlMg5) 5019 5056A
5	JIS H 5202-2010
	Al Mg5

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!