CuZn39Pb1 CW611N - EN 12164-2016

Grade	CuZn39Pb1
European Standard Steel Grade	CW611N
Corresponding Standard	EN 12164-2016 Copper and copper alloys — Rod for free machining purposes
Classification	Copper and Copper Alloys
Density	8.4 g/cm³

CuZn39Pb1 Chemical Element Composition Content (%)

Component	Fe	Ni	Cu	Pb	Al	Sn	Other Total	More
Minimum Value	-	-	59	0.8	-	-	-	Zn:余量
Maximum Value	0.3	0.3	60	1.6	0.05	0.3	0.2	Zn:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuZn39Pb1 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bars; 6≤d≤80, 5≤s≤60	R360	≥360	≤300	≥15(A11.3)；≥20(A)	-
Bars; 6≤d≤80, 5≤s≤60	H070	-	-	-	70~100
Bars; 2≤d≤40, 2≤s≤35	R410	≥410	≥230	≥8(A100)；≥10(A11.3)；≥12(A)	-
Bars; 2≤d≤40, 2≤s≤35	H100	-	-	-	100~145
Bars; 2≤d≤14, 2≤s≤10	R500	≥500	≥350	≥3(A100)；≥5(A11.3)；≥8(A)	-
Bars; 2≤d≤14, 2≤s≤10	H120	-	-	-	≥120

CuZn39Pb1 Corresponding Standards(Same grade name, different standards)

1	EN 12164-2016
	CuZn39Pb1 CW611N
2	EN 12420-2014
	CuZn39Pb1 CW611N
3	EN 12167-2024
	CuZn39Pb1 CW611N

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!