E360 1.0070 A70-2 - NF EN 10025-2-2005

Grade	E360
	1.0070
Old Grade
Corresponding Standard	NF EN 10025-2-2005 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Classification	Carbon Steel

E360 Chemical Element Composition Content (%)

Component	P	S ^①	N ^②
Minimum Value	-	-	-
Maximum Value	0.045	0.045	0.012

◎ The carbon steel series of the French NF EN standard is equivalent to the engineering non-alloy steel of the European standard (EN), and its mechanical properties are the same as the similar non-alloy steel in Germany.
◎ NF old steel number from [NF A35-501 (1983)].
◎ If additional elements are added, they should be mentioned in the inspection report.

E360 Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Long products and flat products; t≤1	690~900	≥360	≥4(l)
Long and flat products; 1<t≤1.5	690~900	≥360	≥5(l)
Long and flat products; 1.5<t≤2	690~900	≥360	≥6(l)
Long and flat products; 2<t≤2.5	690~900	≥360	≥7(l)
Long and flat products; 2.5<t<3	690~900	≥360	≥8(l)
Long and flat products; 3≤t≤16	670~830	≥360	≥11(l)
Long and flat products; 16<t≤40	670~830	≥355	≥11(l)
Long and flat products; 40<t≤63	670~830	≥345	≥10(l)
Long and flat products; 63<t≤80	670~830	≥335	≥9(l)
Long and flat products; 80<t≤100	670~830	≥325	≥9(l)
Long and flat products; 100<t≤150	650~830	≥305	≥8(l)
Long and flat products; 150<t≤200	640~830	≥295	≥7(l)
Long and flat products; 200<t≤250	640~830	≥285	≥7(l)

◎ l-longitudinal；t-transverse

E360 Corresponding Standards(Same grade name, different standards)

1	EN 10025-2-2019
	E360 1.0070
2	DIN EN 10025-2-2019
	E360 1.0070
3	NF EN 10025-2-2005
	E360 1.0070 (A70-2)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!